ASUS Motherboard Setup with Photos (example for H270-Plus, Z270-P, Z270-A, etc)
For this example we are using a simple PIMP crate rig with a ASUS H270-Plus, Intel G5500, 4GB DDR4, and 2x PNY Nvidia GTX 1070 6GB GPUs with Rev5 PCI USB Risers in the x1 slots.
Here is how we setup the BIOS:
blackice last edited by blackice
If you want to use more than 6 GPUs on these boards you must switch something else for the correct working of m.2 risers:
Advanced -> M.2_1 Configuration -> PCI-E
Advanced -> M.2_2 Configuration -> PCI-E
When a device in SATA mode is installed on the M.2_1 socket, SATA_1 is disabled.
When a device in SATA mode is installed on the M.2_2 socket, SATA_6 port cannot be used.
What’s The Difference Between In PCI Express Gen 1 vs. Gen 2 vs. Gen 3? Here is a great guide. Try each if you are having trouble getting booted or detected. https://www.deskdecode.com/difference-between-pci-express-gen-1-gen-2-gen-3/
We promise to keep your email safe and never spam you.
Copyright (c) 2017 PiMP LLC. All rights Reserved.