Using Putty to interact with your Rigs using SSH connection
Smartguy last edited by melt
Download Putty : https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
After downloading, run Putty Configuration
In Host Name you must enter the IP of a Rig that is connected to your local network. You can also save your sessions to go faster.
It's also possible to do it from internet but you need to know your external IP address and to redirect the port 22 of your router on a local IP of a computer.
But for now one solution that i found is to use another computer to make a Teamviewer connexion and then Putty from that computer. It's only in case something is wrong when i'm not at home... Otherwise miner.farm is enough to manage basic problems when you are not near your rigs.
Enabling UTF-8 in Putty for irssi
Startup your putty and go to Translations and from there select UTF-8. If you have already connected to server, you can go into settings also and change Translation the same way.
Making UTF-8 Default translation
Before you connect to server, change translation to UTF-8 and save as "Default" connection, choosing that from the list on initial page and clicking save.
ccordier last edited by
What is the default password for PIMP ? And how can we change it for the putty connection.
The default password is "live", and you can change it by running this command "passwd" and enter new password, and enter it new password again to confirm it.
We promise to keep your email safe and never spam you.
Copyright (c) 2017 PiMP LLC. All rights Reserved.