H110 PRO BTC+ 13GPU motherboard Setup Guide for Mining!

[dasgutya]

Problem I was not able to disable the onboard intel GPU even though I would disable the onboard setting in the bios still I was not able to get any of the GPUs to work.

[dasgutya]

Solution ; The first mining kit (PCIe riser + graphics card + power connections) should be installed on
slot PCIE2. That is the x16 slot < see page 4 of the 6 page H110 PRO BTC+ mining setup guide>

Step 10. Install the second mining kit on the top PCIe x1 slot (which is closest to CPU) and repeat steps
3, 4, 8 and 9.
ASRock H110 Pro BTC+ mining system Installation Guide
http://asrock.pc.cdn.bitgravity.com/Manual/BTC/H110 Pro BTC+.pdf

[melt]

Thank you Dasgutya, moving this to Getting Started thanks!

[melt]

How to configure H110 PRO BTC+ 13 GPU motherboard for mining

Special thanks to Emmanuel from PiMP Beta Team!

ASROCK H110 Pro BTC+ Best Practices

Power ON and then Press F2 many times, about once per second, (like F2..... F2..... F2....) until the BIOS Settings screen comes up.

Updating the BIOS is required. You can use a USB flash disk, or the DHCP Network method.

USB Key method:

• First, download latest BIOS (1.60) on any computer and put it unzipped on the root of a USB KEY.
• Plug USB Key into the H110 motherboard
• Go to Tool (press 3 times right arrow)

Press Instant FLASH.

The Motherboard will search on the USB KEY for BIOS ROM files having .P60 extention

Latest bios is (at the time of writing) : H11BTCP1.60

Select UPDATE and confirm.

When flash process is done, motherboard will reboot automatically - 1st boot will take more than 10 seconds to have again the ability to press F2 to enter bios again.

 
Now, we will do very few modifications on settings to do a perfect mobo for PIMP:

• Go to Advanced (twice right arrow)
• Select CPU CONFIGURATION

• Disable INTEL VIRTUALIZATION TECHNOLOGY
• This is the only thing for this section
• Press ESC to go back
• Select now the 2nd item : CHIPSET CONFIGURATION

3 simple things to do :

• Disable Vt-d
• Disable GPU-MULTIMONITOR (normaly already disabled)
• Enable Restore on AC/Power Loss (by default disabled)
• It’s the last item

Press ESC again to go back
Select the 4th item : Super I/O Configuration

Disable Serial port
Disable Parallel port

Press ESC to go Back
Press ESC to go to main menu
GO to to EXIT and select Save and EXIT

If you return to BIOS on main Menu, you will have the ability to view PCI SLOTS :

After that, My RIG is working well on ETH (AMD RX580 / Claymore)

[marcos]

Melt !

Can you share the BIOS /Overclock information on those RX 580 runnig @31MHZ?

Best Regards,

TheNexus

[gonzalez]

This post is deleted!

[gonzalez]

This post is deleted!

[gonzalez]

@gonzalez said in H110 PRO BTC+ 13GPU motherboard Setup Guide for Mining!:

Hello TheNexus :
here is the link : https://ixcys.com/download/pimp/RX580-G1200-M2250_NITRO_PLUS_OK_cvddc-950-mvddc-1000.zip

[melt]

@gonzalez said in H110 PRO BTC+ 13GPU motherboard Setup Guide for Mining!:

@gonzalez said in H110 PRO BTC+ 13GPU motherboard Setup Guide for Mining!:

Hello TheNexus :
here is the link : https://ixcys.com/download/pimp/RX580-G1200-M2250_NITRO_PLUS_OK_cvddc-950-mvddc-1000.zip

Deleted 2 posts with invalid links, left this one to reply to. This link does not work either. Thanks!