Welcome to the PiMP OS and Miner.farm forum.
Agents not visible all the time - like switching
The Agents wl110 and wl112 are not visible at the same time. If wl110 is shown, wl112 is not shown, and vice versa. it switches every 10-30 seconds when i am on the farmstatus page.
You are using one key for two rigs. You can verify this with the command
pimpkeyin each rigs terminal.
To resolve this, you will have to re-image one of the rigs. And the other rig you will likely have to stop the minerfarm agent for 1 hour:
systemctl stop minerfarmor use the agent console 'x'
thx. we are trying to clone one disk and change the key afterward, as we made some changes to the os like keyboard type etc..
If you purchase 25+ volume key you can do that, otherwise, you will have to customize each rig one-by-one after verifying each key.
i tryed to change the existing "cloned" key to the whished one. is that not possible`?
No, you cannot do this. Again, you must reimage the drive. Also, if you like, for the forum you can click on the icon in the top right and Edit profile and change your username :)
We promise to keep your email safe and never spam you.
Copyright (c) 2012-2018 PiMP LLC. All rights Reserved.