Miner.farm Crypto Currency Community Forum

Browse and post your favorite coin/crypto news, miner.farm and PiMP OS updates and announcements, mining guides, overclocking tips, and more...

Note: To change your forum username: login, click your avatar icon (top right?), Edit Profile. Change the "full name" field to your preferred username.

Quick Links


Can't connect using SSH... Network unreachable


  • Beta Team

    After installing Pimp, I connected via SSH and configure my miner and the miner farm. It is working OK, but after some minutes, I lost the SSH connection, and now I get the "network unreachable" when trying to connect. And locally neither the mouse nor the keyboard are working. But the rig is working as expected. What could be wrong?

    Thanks,

    HMM



  • It could be that your rig is rebooting? Do you have miners engaged at this point and are you sure the profile is stable? What happens when you boot cleanly, does it work for a while and then mouse and keyboard stop again?


  • Beta Team

    No, it is not rebooting now. It is normally working with two GPUs. 18 MH/s on each one and stable for more than 3 hours now. Yes, if I boot cleanly SSH, mouse and keyboard work for 15 to 20 minutes and stop again.

    Thanks for your help.



  • it sounds like there is an issue with hardware or your miner configuration. can you please get in to the shell and type helpme and then paste the url here so we can assess.


  • Beta Team

    I will need to force a reboot, as I do not have access right now. I can stop and restart the miner from the Miner.Farm, but no more. Please, give some time to do it and I will be back asap with the info.


  • Beta Team

    I have one doubt: we have not made the changes to the BIOS. Could this be the problem?


  • Beta Team

    Running Diagnostics, please wait, this may take up to 60 seconds ...

    XXXXXXXXXXXXXXXXXXXXXXXXXXXX PiMP Mining Status XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    ((( Hardware Summary )))
    (( View your rig hardware at a glance. ))
    Motherboard: Product Name: X10SRA-F
    8-Core CPU:
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    model name : Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz
    RAM:
    MemTotal: 65847940 kB
    MemFree: 65160892 kB
    MemAvailable: 64812016 kB
    Primary Boot Disk: Device Model: ST9500325AS

    AMD GPUs:

    NVIDIA GPUs:
    NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

    ((( Software Summary )))
    (( View your rig software at a glance. ))
    PiMP Image v 2.4.2-all rc30
    PIMP Software v20171213
    Current Status: Agent: X29479 (Running) Total HR: [33.98Mh/s] Miners running [1] GPUs [AA]((( pimp --list )))
    (( This shows the current mining profiles loaded in minerfarm with pimp --add, and their status. Note the ID numbers. These are used with commands like pimp --add and pimp --test. ))
    Miners:
    ID 1 localhost:4028 sgminer sgminer.eth.conf (Running)
    ((( pimp --status )))
    (( This shows the current PiMP Rig Mining status similar to the header in the minerfarm Agent Console. ))
    Agent name: X29479 - IP: 10.0.10.8

    Agent service is: Running
    Last update: Success
    Last message: All good!
    Total farm hashrate: 38.78Mh/s
    XXXXXXXXXXXXXXXXXXXXXXXXXXXX PiMP Configuration XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    ((( ll /opt/confs )))
    (( Which confs were modified? The default confs are thoroughly tested by PIMP Testing and Support. We recommend you start with these, verify mining is working, then customize with your own settings and wallets. ))
    total 16
    drwxr-xr-x 3 root root 4096 Feb 6 11:04 .
    drwxr-xr-x 11 root root 4096 Jan 6 09:11 ..
    lrwxrwxrwx 1 root root 31 Sep 6 12:12 bfg.gsd.conf -> /opt/confs/default/bfg.gsd.conf
    lrwxrwxrwx 1 root root 32 Sep 6 12:12 bfg.zeus.conf -> /opt/confs/default/bfg.zeus.conf
    lrwxrwxrwx 1 root root 35 Sep 6 12:12 cgminer.gsd.conf -> /opt/confs/default/cgminer.gsd.conf
    lrwxrwxrwx 1 root root 36 Sep 6 12:12 cgminer.zeus.conf -> /opt/confs/default/cgminer.zeus.conf
    lrwxrwxrwx 1 root root 37 Nov 29 17:29 claymore.dual.pcfg -> /opt/confs/default/claymore.dual.pcfg
    lrwxrwxrwx 1 root root 40 Nov 11 14:31 claymore.xmr.amd.pcfg -> /opt/confs/default/claymore.xmr.amd.pcfg
    lrwxrwxrwx 1 root root 38 Sep 6 12:12 claymore.zcash.pcfg -> /opt/confs/default/claymore.zcash.pcfg
    lrwxrwxrwx 1 root root 43 Oct 4 18:09 cpuminer-multi.aeon.pcfg -> /opt/confs/default/cpuminer-multi.aeon.pcfg
    lrwxrwxrwx 1 root root 42 Sep 6 12:12 cpuminer-multi.xmr.pcfg -> /opt/confs/default/cpuminer-multi.xmr.pcfg
    drwxr-xr-x 2 root root 4096 Jan 6 08:46 default
    lrwxrwxrwx 1 root root 39 Sep 6 12:12 nheqminer.zcash.pcfg -> /opt/confs/default/nheqminer.zcash.pcfg
    lrwxrwxrwx 1 root root 43 Oct 21 11:22 nvidia.ccminer.aeon.pcfg -> /opt/confs/default/nvidia.ccminer.aeon.pcfg
    lrwxrwxrwx 1 root root 43 Sep 6 12:12 nvidia.ccminer.dash.pcfg -> /opt/confs/default/nvidia.ccminer.dash.pcfg
    lrwxrwxrwx 1 root root 43 Sep 6 12:12 nvidia.ccminer.lbry.pcfg -> /opt/confs/default/nvidia.ccminer.lbry.pcfg
    lrwxrwxrwx 1 root root 42 Jan 6 08:46 nvidia.ccminer.neo.pcfg -> /opt/confs/default/nvidia.ccminer.neo.pcfg
    lrwxrwxrwx 1 root root 44 Sep 6 12:12 nvidia.ccminer.skein.pcfg -> /opt/confs/default/nvidia.ccminer.skein.pcfg
    lrwxrwxrwx 1 root root 44 Sep 6 12:12 nvidia.ccminer.skunk.pcfg -> /opt/confs/default/nvidia.ccminer.skunk.pcfg
    lrwxrwxrwx 1 root root 42 Sep 6 12:12 nvidia.ccminer.xmr.pcfg -> /opt/confs/default/nvidia.ccminer.xmr.pcfg
    lrwxrwxrwx 1 root root 41 Sep 6 12:12 nvidia.ewbf.zcash.pcfg -> /opt/confs/default/nvidia.ewbf.zcash.pcfg
    lrwxrwxrwx 1 root root 42 Dec 11 00:49 optiminer.equihash.pcfg -> /opt/confs/default/optiminer.equihash.pcfg
    lrwxrwxrwx 1 root root 39 Sep 6 12:12 optiminer.zcash.pcfg -> /opt/confs/default/optiminer.zcash.pcfg
    lrwxrwxrwx 1 root root 28 Sep 6 12:12 README.md -> /opt/confs/default/README.md
    lrwxrwxrwx 1 root root 36 Sep 6 12:12 sgminer.dash.conf -> /opt/confs/default/sgminer.dash.conf
    -rw-r--r-- 1 root root 1620 Feb 6 11:10 sgminer.eth.conf
    lrwxrwxrwx 1 root root 39 Sep 6 12:12 sgminer.groestl.conf -> /opt/confs/default/sgminer.groestl.conf
    lrwxrwxrwx 1 root root 36 Sep 6 12:12 sgminer.lbry.conf -> /opt/confs/default/sgminer.lbry.conf
    lrwxrwxrwx 1 root root 37 Sep 6 12:12 sgminer.multi.conf -> /opt/confs/default/sgminer.multi.conf
    lrwxrwxrwx 1 root root 44 Sep 6 12:12 sgminer.nicehash.eth.conf -> /opt/confs/default/sgminer.nicehash.eth.conf
    lrwxrwxrwx 1 root root 46 Sep 6 12:12 sgminer.nicehash.multi.conf -> /opt/confs/default/sgminer.nicehash.multi.conf
    lrwxrwxrwx 1 root root 44 Sep 6 12:12 sgminer.nicehash.xmr.conf -> /opt/confs/default/sgminer.nicehash.xmr.conf
    lrwxrwxrwx 1 root root 46 Sep 6 12:13 sgminer.nicehash.zcash.conf -> /opt/confs/default/sgminer.nicehash.zcash.conf
    lrwxrwxrwx 1 root root 38 Sep 6 12:13 sgminer.pascal.conf -> /opt/confs/default/sgminer.pascal.conf
    lrwxrwxrwx 1 root root 36 Sep 6 12:13 sgminer.sigt.conf -> /opt/confs/default/sgminer.sigt.conf
    lrwxrwxrwx 1 root root 38 Sep 6 12:13 sgminer.x11evo.conf -> /opt/confs/default/sgminer.x11evo.conf
    lrwxrwxrwx 1 root root 35 Oct 20 18:22 sgminer.xmr.conf -> /opt/confs/default/sgminer.xmr.conf
    lrwxrwxrwx 1 root root 37 Sep 6 12:13 sgminer.zcash.conf -> /opt/confs/default/sgminer.zcash.conf
    ((( ll /opt/miners )))
    (( Which miners are compiled? This shows if there were any pimpups done to the miners themselves. May be necessary to pimpup a miner for good performance. ))
    total 68
    drwxr-xr-x 19 root root 12288 Dec 11 00:51 bfgminer
    drwxr-xr-x 26 root root 4096 Dec 11 00:51 ccminer
    drwxr-xr-x 9 root root 4096 Dec 11 00:51 cgminer
    drwxr-xr-x 2 root root 4096 Dec 13 18:53 claymore-dual
    drwxr-xr-x 2 root root 4096 Dec 11 00:30 claymore-xmr-amd
    drwxr-xr-x 2 root root 4096 Dec 11 00:30 claymore-zcash-amd
    drwxr-xr-x 13 root root 4096 Dec 11 00:51 cpuminer-multi
    drwxr-xr-x 13 root root 4096 Dec 11 00:51 lbrycrd-gpu
    drwxr-xr-x 10 root root 4096 Oct 21 11:21 nheqminer
    drwxr-xr-x 2 root root 4096 Dec 10 23:55 nvidia-ewbf-zcash
    drwxr-xr-x 8 root root 4096 Dec 11 00:51 optiminer-equihash
    drwxr-xr-x 9 root root 4096 Dec 11 00:51 optiminer-zcash
    drwxr-xr-x 13 root root 4096 Dec 11 00:51 sgminer
    drwxr-xr-x 13 root root 4096 Dec 11 00:51 sgminer-pascal
    drwxr-xr-x 14 root root 4096 Dec 11 00:51 sgminer-tpruvot
    ((( ll /opt/bins )))
    (( Which kernel binary files have been created? This usually means the GPU will mine on that profile. Sometimes after a pimpup of a miner, you will need to run cleanbins command to remove these for good performance. ))
    total 324
    -rw-r--r-- 1 root root 328384 Feb 6 11:13 ethash-newHawaiigw192l8.bin
    ((( cat /root/gpuvars )))
    (( Which gpuvars were modified? Need to make sure the environment variables needed for mining are intact. ))
    export GPU_MAX_ALLOC_PERCENT=100
    export GPU_USE_SYNC_OBJECTS=1
    export GPU_MAX_HEAP_SIZE=100
    export LANGUAGE=en_US.UTF-8
    export LC_ALL=en_US.UTF-8
    export PERL_JSON_BACKEND=0
    export DISPLAY=:0
    export GPU_FORCE_64BIT_PTR=1

    ((( cat /root/startup.sh )))
    (( What startup parameters are you using? This may impact mining performance, fan speeds, and mining starting on boot. ))
    #!/bin/bash

    ==================================================================

    .__

    #______ || _____ ______ Portable Instant Mining Platform
    #_
    _ | |/ ____ \ PiMP
    #| |> > | Y Y \ |> >
    #| /|||_| / / Support: #PiMP on FreenodeIRC
    #|
    | /|
    | https://getPiMP.org

    Copyright (c) 2017 getPiMP.org. All Rights Reserved.

    Author: getPiMP.org

    License: This code is licensed for use with getPiMP.org only.

    Description: This is where you can change user-editable start up options.

    ==================================================================

    #####################################################################

    INSTRUCTIONS - PLEASE READ

    #####################################################################

    NOTE 1: How to edit this file.

    TO EDIT THIS FILE USE COMMAND: nano /etc/crontab

    IN GUI YOU CAN USE: leafpad /etc/crontab

    (edit command is just for the conf/pcfg!)

    NOTE 2: Absolute Paths

    In this file you have to specify absolute paths.

    Most of the pimp tools are in /opt/pimp.

    Examples: /opt/pimp/pimp --start 1

    /opt/minerfarm/minerfarm --start 1 (same effect)

    To determine what another tool uses for path you can do:

    which [command]

    e.g. which touch would output: /usr/bin/touch

    NOTE 3: This file is called by /etc/crontab upon boot.

    To schedule things on a regular basis (every 12 hours or every Friday at 5 PM),

    You would have to nano /etc/crontab directly.

    NOTE 4:

    If you get "permission denied" run: chmod +x /path/to/executable

    The file must be exectuable. Try running it by hand by typing it in.

    Thank you for reading the instructions.

    #####################################################################

    GPU CONFIG

    Default: 20 seconds after boot, Set the fans to 60% as precaution.

    #####################################################################

    Setup the clocks and fans according to what you edited

    Step 1: run this command manually: gputool --config

    it will make you a config file based on your current GPU setup.

    Step 2: nano /root/gpu-config.json

    put in what you want.

    Step 3: Run the gputool --config again and it will apply your values.

    Step 4: To have it run on boot, use this command. Timing is optimal

    for most GPUs.

    sleep 20 && /opt/pimp/gputool --config

    #####################################################################

    START MINING:

    Default: 25 seconds after boot, Start miner with ID 1

    #####################################################################

    sleep 25 && /opt/pimp/pimp --start 1

    Optional: Start other miners like CPU miner and ASIC

    sleep 30 && /opt/pimp/pimp --start 2

    sleep 35 && /opt/pimp/pimp --start 3

    #####################################################################

    DISABLE GPU LEDs: This can save power or turn off lights if you want.

    OBVIOUSLY THIS IS FOR NVIDIA ONLY! NOT AMD.

    GPULogoBrightness can take a value from 0 to 100, this affects the

    brightness of the backlight.

    0 - completely off, 100 - maximum brightness.

    Default: disabled, just remove the # to enable.

    If no GPU specified (like default) it will assign to all GPUs in the rig.

    #####################################################################

    #/usr/bin/nvidia-settings --assign GPULogoBrightness=0

    #####################################################################

    USB LCD Displays

    Start the LCD display service. Optional, for USB LCD display support.

    These are for any "USB LCD device" commonly used with Raspi

    Example: https://www.adafruit.com/product/782

    The default will cycle through CPU Load, network, etc.

    #####################################################################

    sleep 10 && systemctl LCDd start && sleep 10 && lcdproc

    ((( cat /root/gpu-config.json )))
    (( What are the current fan/clock settings? ))
    {
    "comment": "Please see https://getpimp.org for information about configuring this file",
    "gpuSettings": [
    {
    "gpu_id": "0",
    "fanspeed": "90",
    "temptarget": "70"
    }
    ]
    }
    XXXXXXXXXXXXXXXXXXXXXXXXXXXX PiMP Software and Services XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    ((( ll /opt/pimp )))
    (( What do the pimp software files look like? ))
    total 5620
    drwxr-xr-x 2 root root 4096 Nov 16 20:42 amdmeminfo
    -rwxr-xr-x 1 root root 1540944 Oct 10 18:36 atiflash
    -rwxr-xr-x 1 pimp pimp 66370 Dec 13 19:05 bootdetect
    drwxr-xr-x 5 root root 4096 Dec 12 12:30 go
    -rwxr-xr-x 1 root root 277054 Dec 13 19:05 gputool
    -rwxr-xr-x 1 root root 28829 Dec 13 16:55 gputool.newbroken
    -rwxr-xr-x 1 root root 128962 Dec 13 19:05 helpme
    -rw-r--r-- 1 root root 3690 Dec 13 19:05 newpimp.txt
    -rwxr-xr-x 1 root root 2879912 Oct 21 14:06 nvflash
    drwxr-xr-x 2 root root 4096 Sep 6 12:06 ohgodatool
    -rwxr-xr-x 1 root root 404222 Dec 13 19:05 pimp
    -rwxr-xr-x 1 root root 116942 Dec 13 19:05 pimpkey
    -rw-r--r-- 1 root root 12055 Jan 6 08:46 pimpminers.conf
    -rwxr-xr-x 1 root root 255254 Dec 12 19:31 pimpup
    drwxr-xr-x 3 root root 4096 Dec 13 19:31 PolarisBiosEditor
    ((( ll /opt/minerfarm )))
    (( What do the minerfarm software files look like? ))
    total 1000
    drwxr-xr-x 2 root root 4096 Sep 6 11:47 lib
    -rwxr-xr-x 1 root root 563245 Dec 13 19:05 minerfarm
    -rwxr-xr-x 1 pimp pimp 449770 Dec 14 18:25 minerfarm_svc
    -rw-r--r-- 1 root root 2809 Jul 28 2017 profiles.txt
    ((( cat /etc/crontab )))
    (( What cron entries were modified? Just checking what you have on startup and if you are properly calling /root/startup.sh. ))

    /etc/crontab: system-wide crontab

    Unlike any other crontab you don't have to run the `crontab'

    command to install the new version when you edit this file

    and files in /etc/cron.d. These files also have username fields,

    that none of the other crontabs do.

    SHELL=/bin/sh
    PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

    #####################################################################

    HOW TO SCHEDULE JOBS IN CRONTAB:

    #####################################################################

    +---------------- minute (0 - 59)

    | +------------- hour (0 - 23)

    | | +---------- day of month (1 - 31)

    | | | +------- month (1 - 12)

    | | | | +---- day of week (0 - 6) (Sunday=0)

    | | | | |

    * * * * * command to be executed

    In other words:

    1. Minute when the process will be started [0-60]

    2. Hour when the process will be started [0-23]

    3. Day of the month when the process will be started [1-28/29/30/31]

    4. Month of the year when the process will be started [1-12]

    5. Weekday when the process will be started [0-6] [0 is Sunday]

    FOR INTERVALS:

    Use the division bar (slash) to divide it up.

    all x min = */x

    example: 0/15 in minute column would be every 15 minutes.

    5 8 * * 0 will run the job every sunday at 8:05 am.

    For more information and a neat calculator, see https://crontab.guru/

    #####################################################################

    USER EDITABLE SETTINGS

    Use: nano /root/startup.sh to change your boot settings.

    #####################################################################

    COMMANDS RUN ON BOOT UP:

    To run scripts on reboot, use: @reboot root /path/to/executable

    If you get "permission denied" run: chmod +x /path/to/executable

    It is best to edit the on-boot stuff with: nano /root/startup.sh

    @reboot root /root/startup.sh

    COMMANDS RUN ON A SCHEDULE:

    Reboot automatically every 6 or 12 hours:

    0 /6 * * * sync && echo b > /proc/sysrq-trigger

    0 /12 * * * sync && echo b > /proc/sysrq-trigger

    This will reboot at 1 AM Zulu (Rig local time):

    0 1 * * * sync && echo b > /proc/sysrq-trigger

    #####################################################################

    DO NOT EDIT BELOW THIS LINE

    #####################################################################

    m h dom mon dow user command

    17 * * * * root cd / && run-parts --report /etc/cron.hourly
    25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
    47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
    52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )

    ((( minerfarm service )))
    (( Is minerfarm agent service running? If it is not running, try: systemctl start minerfarm, or minerfarm and then use 'o' to start.))
    ● minerfarm.service - Service process for miner.farm agent
    Loaded: loaded (/etc/systemd/system/minerfarm.service; enabled; vendor preset: enabled)
    Active: active (running) since Tue 2018-02-06 16:47:02 EST; 1min 15s ago
    Process: 689 ExecStart=/opt/minerfarm/minerfarm_svc (code=exited, status=0/SUCCESS)
    Main PID: 748 (minerfarm_svc)
    CGroup: /system.slice/minerfarm.service
    └─748 /usr/bin/perl /opt/minerfarm/minerfarm_svc

    Feb 06 16:46:57 pimp2 systemd[1]: Starting Service process for miner.farm agent...
    Feb 06 16:47:02 pimp2 systemd[1]: Started Service process for miner.farm agent.
    ((( pimp vnc service )))
    (( Is the remote vnc desktop service running? If not, RDP and VNC will not work. ))
    ● pimpvnc.service - PiMP VNC Service
    Loaded: loaded (/etc/systemd/user/pimpvnc.service; enabled; vendor preset: enabled)
    Active: failed (Result: exit-code) since Tue 2018-02-06 16:47:32 EST; 45s ago
    Process: 1367 ExecStart=/usr/bin/x11vnc -v -display :0 -auth .Xauthority -nopw -logappend /var/log/pimpvnc.log (code=exited, status=1/FAILURE)
    Main PID: 1367 (code=exited, status=1/FAILURE)

    Feb 06 16:47:32 pimp2 systemd[1363]: Started PiMP VNC Service.
    Feb 06 16:47:32 pimp2 systemd[1363]: pimpvnc.service: Main process exited, code=exited, status=1/FAILURE
    Feb 06 16:47:32 pimp2 systemd[1363]: pimpvnc.service: Unit entered failed state.
    Feb 06 16:47:32 pimp2 systemd[1363]: pimpvnc.service: Failed with result 'exit-code'.
    ((( lightdm service )))
    (( Is the desktop GUI service running? If this is not running you will not get GUI/RDP/VNC access, and may not ))
    ● lightdm.service - Light Display Manager
    Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
    Active: inactive (dead) (Result: exit-code) since Tue 2018-02-06 16:47:05 EST; 1min 12s ago
    Docs: man:lightdm(1)
    Process: 961 ExecStart=/usr/sbin/lightdm (code=exited, status=1/FAILURE)
    Process: 957 ExecStartPre=/bin/sh -c [ "$(basename $(cat /etc/X11/default-display-manager 2>/dev/null))" = "lightdm" ] (code=exited, status=0/SUCCESS)
    Main PID: 961 (code=exited, status=1/FAILURE)

    Feb 06 16:47:05 pimp2 systemd[1]: lightdm.service: Unit entered failed state.
    Feb 06 16:47:05 pimp2 systemd[1]: lightdm.service: Failed with result 'exit-code'.
    Feb 06 16:47:05 pimp2 systemd[1]: lightdm.service: Service hold-off time over, scheduling restart.
    Feb 06 16:47:05 pimp2 systemd[1]: Stopped Light Display Manager.
    Feb 06 16:47:05 pimp2 systemd[1]: lightdm.service: Start request repeated too quickly.
    Feb 06 16:47:05 pimp2 systemd[1]: Failed to start Light Display Manager.

    *** Beginning GPU scan. This may take up to 1 minute. If it hangs here, use Control-C to abort. It is most likely a hardware problem.

    ..Use of uninitialized value $gpu in string eq at (eval 2) line 212.
    Use of uninitialized value $gpu in string eq at (eval 2) line 307.
    .........Can't open display :0
    .XXXXXXXXXXXXXXXXXXXXXXXXXXXX GPU Info XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    ((( lspci -v | grep VGA )))
    (( What GPUs are seen by the PCI subsystem? This is Linux physically detecting the GPUs. ))
    0a:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30) (prog-if 00 [VGA controller])
    ((( gputool --status )))
    (( What GPUs are seen by the PIMP GPUTOOL SYSFS subsystem? AMDGPU cards only. ))
    PIMP GPU Tool v20171213
    GPUs type: UNK
    NOTE: At least one miner appears to be running.
    ((( /opt/pimp/atiflash -ai )))
    (( Is atiflash seeing the GPUs? FGLRX/AMDGPU cards only. ))
    Adapter 0 (BN=03, DN=00, PCIID=67A01002, SSID=03351002)
    Asic Family : Hawaii
    Flash Type : M25P20 (256 KB)
    Product Name : C681 Hawaii GL44 A0 GDDR5 16GB 256Mx16 300e/150m
    Bios Config File : C6810100.101
    Bios P/N : 113-C6810100-101
    Bios Version : 015.046.000.016.004732
    Bios Date : 07/25/14 14:15
    ROM Image Type : Legacy Image
    ROM Image Details :
    Image[0]: Size(65536 Bytes), Type(Legacy Image)
    Adapter 1 (BN=04, DN=00, PCIID=67A01002, SSID=03351002)
    Asic Family : Hawaii
    Flash Type : M25P20 (256 KB)
    Product Name : C681 Hawaii GL44 A0 GDDR5 16GB 256Mx16 300e/150m
    Bios Config File : C6810100.101
    Bios P/N : 113-C6810100-101
    Bios Version : 015.046.000.016.004732
    Bios Date : 07/25/14 14:15
    ROM Image Type : Legacy Image
    ROM Image Details :
    Image[0]: Size(65536 Bytes), Type(Legacy Image)
    ((( amdmeminfo )))
    (( Is amdmeminfo seeing the GPUs? FGLRX/AMDGPU cards only. ))
    ((( ***** /opt/miners/sgminer/sgminer -n ***** )))
    (( Is sgminer seeing the GPUs? Very important. If sgminer sees your GPUs, then mining should work with the default profiles. Most likely if your GPUs are seen here but mining is not working, it is a conf error, network or pool issue.. Try default conf with del command, or use pimp --debug 1 to look at the miner screen directly in the debug mode to get more information. ))
    [16:48:20] CL Platform vendor: Advanced Micro Devices, Inc.
    [16:48:20] CL Platform name: AMD Accelerated Parallel Processing
    [16:48:20] CL Platform version: OpenCL 2.1 AMD-APP (2527.3)
    [16:48:20] Platform devices: 2
    [16:48:20] 0 Hawaii
    [16:48:20] 1 Hawaii
    [16:48:20] 2 GPU devices max detected
    ((( /opt/miners/optiminer-zcash/optiminer-zcash --list-devices )))
    (( Is optiminer seeing the GPUs? AMDGPU/FGLRX only, same basic thoughts as sgminer above. ))
    [2018-02-06 16:48:20.449] [info] Optiminer/Zcash 1.7.0 (C) Optiminer 2017
    Platform (-c) 0, Device (-d) 0:
    Platform Vendor: AMD
    Device Name: Hawaii
    Driver Version: 2527.3
    Address bits: 64
    Available memory: 14500368384
    GCN Support: Gen 2
    Has device specific faster kernel: Yes
    Platform (-c) 0, Device (-d) 1:
    Platform Vendor: AMD
    Device Name: Hawaii
    Driver Version: 2527.3
    Address bits: 64
    Available memory: 14500368384
    GCN Support: Gen 2
    Has device specific faster kernel: Yes
    ((( nvidia-smi )))
    (( Is nvidia-smi seeing the GPUs? This is the main overclocking and admin tool for NVIDIA GPUs. If this looks good it is highly likely you will successfully mine. ))
    NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

    ((( nVidia Power use )))
    (( What kind of power are the nVidia GPUs drawing? ))
    NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

    ((( xrandr -q )))
    (( What information does Xorg have? ))
    XXXXXXXXXXXXXXXXXXXXXXXXXXXX Hardware Info XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    ((( Disk SMART Data for /dev/sda )))
    (( What is the status of the boot disk? Errors or Reallocated Sectors means the disk should be replaced immediately. ))
    smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-rc2-pimp-celery+] (local build)
    Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Model Family: Seagate Momentus 5400.6
    Device Model: ST9500325AS
    Serial Number: S2W411N5
    LU WWN Device Id: 5 000c50 045f1f474
    Firmware Version: 0001SDM1
    User Capacity: 500,107,862,016 bytes [500 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS T13/1699-D revision 4
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Tue Feb 6 16:48:20 2018 EST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    See vendor-specific Attribute list for marginal Attributes.

    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 0) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 139) minutes.
    Conveyance self-test routine
    recommended polling time: ( 2) minutes.
    SCT capabilities: (0x103b) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 179866904
    3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
    4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 697
    5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 47516316
    9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 29075
    10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 666
    184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
    187 Reported_Uncorrect 0x0032 094 094 000 Old_age Always - 6
    188 Command_Timeout 0x0032 100 099 000 Old_age Always - 12
    189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
    190 Airflow_Temperature_Cel 0x0022 071 045 045 Old_age Always In_the_past 29 (Min/Max 29/30)
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 11
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 62
    193 Load_Cycle_Count 0x0032 026 026 000 Old_age Always - 149522
    194 Temperature_Celsius 0x0022 029 055 000 Old_age Always - 29 (0 17 0 0 0)
    195 Hardware_ECC_Recovered 0x001a 049 047 000 Old_age Always - 179866904
    197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0

    SMART Error Log Version: 1
    ATA Error Count: 5
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.

    Error 5 occurred at disk power-on lifetime: 8997 hours (374 days + 21 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH


    40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name


    25 00 08 ff ff ff ef 00 6d+18:04:02.858 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:04:00.260 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:57.494 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:57.480 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:55.990 READ DMA EXT

    Error 4 occurred at disk power-on lifetime: 8997 hours (374 days + 21 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH


    40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name


    25 00 08 ff ff ff ef 00 6d+18:04:00.260 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:57.494 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:57.480 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:55.990 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:55.965 READ DMA EXT

    Error 3 occurred at disk power-on lifetime: 8997 hours (374 days + 21 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH


    40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name


    25 00 08 ff ff ff ef 00 6d+18:03:57.494 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:57.480 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:55.990 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:55.965 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+18:03:55.963 READ DMA EXT

    Error 2 occurred at disk power-on lifetime: 8993 hours (374 days + 17 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH


    40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name


    25 00 08 ff ff ff ef 00 6d+13:19:15.940 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+13:19:13.528 READ DMA EXT
    25 00 08 38 16 82 e3 00 6d+13:19:13.527 READ DMA EXT
    25 00 08 30 16 82 e3 00 6d+13:19:13.526 READ DMA EXT
    25 00 08 18 16 82 e3 00 6d+13:19:13.523 READ DMA EXT

    Error 1 occurred at disk power-on lifetime: 8993 hours (374 days + 17 hours)
    When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
    ER ST SC SN CL CH DH


    40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

    Commands leading to the command that caused the error were:
    CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name


    25 00 08 ff ff ff ef 00 6d+13:19:13.528 READ DMA EXT
    25 00 08 38 16 82 e3 00 6d+13:19:13.527 READ DMA EXT
    25 00 08 30 16 82 e3 00 6d+13:19:13.526 READ DMA EXT
    25 00 08 18 16 82 e3 00 6d+13:19:13.523 READ DMA EXT
    25 00 08 ff ff ff ef 00 6d+13:19:13.310 READ DMA EXT

    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

    ((( Chassis Temps )))
    (( How are the system temperatures? ))
    coretemp-isa-0000
    Adapter: ISA adapter
    Package id 0: +33.0°C (high = +85.0°C, crit = +95.0°C)
    Core 0: +26.0°C (high = +85.0°C, crit = +95.0°C)
    Core 1: +26.0°C (high = +85.0°C, crit = +95.0°C)
    Core 2: +26.0°C (high = +85.0°C, crit = +95.0°C)
    Core 3: +26.0°C (high = +85.0°C, crit = +95.0°C)

    amdgpu-pci-0300
    Adapter: PCI adapter
    temp1: +60.0°C (crit = +120.0°C, hyst = +90.0°C)

    amdgpu-pci-0400
    Adapter: PCI adapter
    temp1: +69.0°C (crit = +120.0°C, hyst = +90.0°C)

    tail: cannot open '/var/log/miner.log' for reading: No such file or directory
    tail: cannot open '/var/log/pimpup.log' for reading: No such file or directory
    tail: cannot open '/var/log/Xorg.0.lorg' for reading: No such file or directory
    XXXXXXXXXXXXXXXXXXXXXXXXXXXX Logs XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    ((( tail -50 /var/log/agent.log )))
    (( Log for minerfarm agent. ))
    [PID]<minerfarm info> 2018-02-06 15:21:40Z: (FCTRL) local IP is 10.0.10.7
    .
    [PID]<minerfarm info> 2018-02-06 16:13:54Z: (CLI user) Starting API miner at 127.0.0.1:4028
    bin: sgminer
    conf: sgminer.eth.conf
    [PID]<minerfarm info> 2018-02-06 16:13:54Z: (CLI user) Config /opt/confs/sgminer.eth.conf passed validation
    [PID]<minerfarm info> 2018-02-06 16:13:56Z: (CLI user) Miner screen started...
    [PID]<minerfarm info> 2018-02-06 16:14:06Z: (CLI user) Miner available. Startup completed successfully.
    [PID]<minerfarm info> 2018-02-06 19:54:35Z: (MFCTL) got miner command quit (ip 127.0.0.1, port 4028, flags none)
    [PID]<minerfarm info> 2018-02-06 19:54:35Z: Stopping miner on port 4028...
    [PID]<minerfarm info> 2018-02-06 19:54:37Z: Miner stopped.
    [PID]<minerfarm info> 2018-02-06 19:59:04Z: (MFCTL) got miner command start (ip 127.0.0.1, port 4028, flags none)
    [PID]<minerfarm info> 2018-02-06 19:59:04Z: Starting API miner at 127.0.0.1:4028
    bin: sgminer
    conf: sgminer.eth.conf
    [PID]<minerfarm info> 2018-02-06 19:59:04Z: Config /opt/confs/sgminer.eth.conf passed validation
    [PID]<minerfarm info> 2018-02-06 19:59:06Z: Miner screen started...
    [PID]<minerfarm info> 2018-02-06 19:59:13Z: Miner available. Startup completed successfully.
    [PID]<minerfarm info> 2018-02-06 19:59:13Z: start error: Valid JSON
    [PID]<minerfarm info> 2018-02-06 19:59:16Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:20Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:23Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:26Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:29Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:33Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:36Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:39Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 19:59:42Z: start error: Miner ID 1 already running.
    [PID]<minerfarm info> 2018-02-06 21:34:31Z: (FCTRL) service started.
    [PID]<minerfarm info> 2018-02-06 21:34:49Z: (FCTRL) local IP is 10.0.0.15
    .
    [PID]<minerfarm info> 2018-02-06 21:35:11Z: Starting API miner at 127.0.0.1:4028
    bin: sgminer
    conf: sgminer.eth.conf
    [PID]<minerfarm info> 2018-02-06 21:35:11Z: Config /opt/confs/sgminer.eth.conf passed validation
    [PID]<minerfarm info> 2018-02-06 21:35:13Z: Miner screen started...
    [PID]<minerfarm info> 2018-02-06 21:35:22Z: Miner available. Startup completed successfully.
    [PID]<minerfarm info> 2018-02-06 21:47:02Z: (FCTRL) service started.
    [PID]<minerfarm info> 2018-02-06 21:47:02Z: (FCTRL) local IP is 10.0.10.8
    .
    [PID]<minerfarm info> 2018-02-06 21:47:08Z: (MFCTL) got miner command restart (ip 127.0.0.1, port 4028, flags none)
    [PID]<minerfarm info> 2018-02-06 21:47:08Z: No API available on port 4028.
    [PID]<minerfarm info> 2018-02-06 21:47:10Z: Starting API miner at 127.0.0.1:4028
    bin: sgminer
    conf: sgminer.eth.conf
    [PID]<minerfarm info> 2018-02-06 21:47:10Z: Config /opt/confs/sgminer.eth.conf passed validation
    [PID]<minerfarm info> 2018-02-06 21:47:12Z: Miner screen started...
    [PID]<minerfarm info> 2018-02-06 21:47:22Z: Miner available. Startup completed successfully.
    [PID]<minerfarm info> 2018-02-06 21:47:22Z: start error: Valid JSON
    [PID]<minerfarm info> 2018-02-06 21:47:25Z: Another miner is running on port 4028 - not starting.
    ((( tail -50 /var/log/miner.log )))
    (( Pimp unified miner logging of the miner instances. ))
    ((( tail -20 /var/log/pimpup.log )))
    (( Log of pimpup updates. ))
    ((( /bin/dmesg | tail -25 )))
    (( Log of kernel ring messages. This can show some of the things that flash by on boot. Mostly warnings. Also when you plug things into the box like USB drives or network cables, it will show here. ))
    [ 15.272246] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
    [ 15.272248] EDAC sbridge: Seeking for: PCI ID 8086:6faf
    [ 15.272249] EDAC sbridge: Seeking for: PCI ID 8086:6faf
    [ 15.272262] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
    [ 15.272282] EDAC sbridge: Couldn't find mci handler
    [ 15.272294] EDAC sbridge: Failed to register device with error -19.
    [ 15.272367] intel_rapl: Found RAPL domain package
    [ 16.103792] audit: type=1400 audit(1517953611.662:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=519 comm="apparmor_parser"
    [ 16.114803] audit: type=1400 audit(1517953611.674:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=521 comm="apparmor_parser"
    [ 16.115850] audit: type=1400 audit(1517953611.674:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=515 comm="apparmor_parser"
    [ 16.115852] audit: type=1400 audit(1517953611.674:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=515 comm="apparmor_parser"
    [ 16.121544] audit: type=1400 audit(1517953611.682:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=516 comm="apparmor_parser"
    [ 16.121546] audit: type=1400 audit(1517953611.682:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=516 comm="apparmor_parser"
    [ 16.121547] audit: type=1400 audit(1517953611.682:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=516 comm="apparmor_parser"
    [ 16.121567] audit: type=1400 audit(1517953611.682:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=516 comm="apparmor_parser"
    [ 16.136595] audit: type=1400 audit(1517953611.698:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=517 comm="apparmor_parser"
    [ 16.136597] audit: type=1400 audit(1517953611.698:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=517 comm="apparmor_parser"
    [ 17.606845] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 23.380898] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 23.426375] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 26.208589] igb 0000:07:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
    [ 26.208888] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    [ 101.481619] show_signal_msg: 4 callbacks suppressed
    [ 101.481621] amdmeminfo[1570]: segfault at 20 ip 0000000040cdb611 sp 0000000036ba8870 error 4 in amdmeminfo[400000+4000]
    [ 104.531628] amdmeminfo[1641]: segfault at 20 ip 0000000040cdb611 sp 00000000b0febc0d error 4 in amdmeminfo[400000+4000]
    ((( tail -100 /var/log/Xorg.0.lorg )))
    (( Xorg log. Shows problems with displays, monitors, and GPUs when trying to load the GUI. ))

    =========================[helpme URL START]=========================

    https://helpme.getpimp.org/X29479-1517953701.html

    ==========================[helpme URL END]==========================

    How to use this URL:
    Step 1. Load the URL into a browser and look at the report. If you are having trouble you might see a clue here.

    Step 2. Search for your error/issue on https://forum.getpimp.org

    Step 3. Post on the forum if you cannot find your solution.

    Step 4. You can also join the PiMP discord at https://discord.me/pimp. When you are in the chat, share the above url with Support.

    Unable to connect! Log saved to /tmp/helpme.1517953701



  • next time please only paste the url, not the body.

    yes, you need to spend some time setting your motherboard up correctly. i can see in dmesg that your onboard GPU is enabled which will prevent pimp from working.


  • Beta Team

    OK. Understood. And thanks for your help.

    HMM


 



Want 10% more hash from your rigs?



We promise to keep your email safe and never spam you.



© 2014-2021 Miner.farm | By Miners, For Miners | Portable Instant Mining Platform, LLC