Help detecting 1070ti

[spyroinc]

My rig has been running 3 x 580Rx's and I just picked up a Gigabyte 1070ti. I installed the 1070 but Pimp doesn't appear to detect it.

I ran gputool --list and it isn't listed. Tried --update and also deleted he config and had it create a new one.

Is there something else I should do to help Pimp detect the card?

[spyroinc]

I also ran lspci and don't see it listed but I am not sure what some of the entries are.

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 0-3) (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 4-5) (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
06:00.0 Network controller: Broadcom Limited BCM4360 802.11ac Wireless Network Adapter (rev 03)
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7)
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580] (rev e7)
08:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]

[spyroinc]

Update: I my have a riser card issue so I switched them around. Once I did, I was able to get this error.

[08:59:42] Building binary ethash-newGeForce GTX 1070 Tigw192l8.bin
[08:59:43] Initialising kernel ethash-new.cl with nfactor 10, n 1024
[08:59:49] API running in IP access mode on port 4028 (33)
[09:00:01] Error -54: Enqueueing kernel onto command queue. (clEnqueueNDRangeKer
nel)
[09:00:01] GPU 0 failure, disabling!

[blackice]

You must add nvidias first. Then amd. This is a feature.

[spyroinc]

Can you expand on what that means?

I need to remove all my cards, wipe the config, add NVidia, get that to work then add AMD cards or is there an easier route?

[blackice]

This is the way to go. All first and step by step.

[spyroinc]

It is definitely finding the card now and the Nvidia is the only one installed. But I am still getting the following error:

[18:22:33] Startup Pool No = 0
[18:22:33] Initialising kernel ethash-new.cl with nfactor 10, n 1024
[18:22:40] API running in IP access mode on port 4028 (23)
[18:22:50] Error -54: Enqueueing kernel onto command queue. (clEnqueueNDRangeKer
nel)
[18:22:50] GPU 0 failure, disabling!